| |
 |
| |
| |
|
| 
|
|
The generator was produced by Britain STAMFORD.
STAMFORS Alternator
4 poles, protective screen, antidrip protection IP23, auto-excitation, automatic voltage regulation, no brush, full succession damping winding, salient pole type rotor, AC excitation piece and rotary rectifier cell, H grade insulation, winding receiving three-layer impregnation in the hot hardness varnish resisting moisture, oil and acid, or vacuum pressure impregnation in special polyester resin. The electrical designs comply with the stipulations of VDE530, UTE51100, NEMA MG1-32, CEMA IEC34-1, CSA22.2 and AS1359 in the third section of BS5000. |
Generator
1 Manufacturer: Newage International
2 Generator type: absence of brush, self excitation (PMG), rotating magnetic field, AVR, single bearing.
3 Insulation grade: "H"
4 Protection grade: IP23
5 Generator cooling type: automatic wind cooling, closed circulation
6 Rotor winding wiring: connected in star, 380V
7 Generator bearing lubrication system: grease lubrication
8 generating set structural style: one-piece
9 Coupled mode with engine: it is directly coupled to the engine through flexible coupling disk.
10 Direction of rotation: couterclockwise from the angle of uncoupling end of generator (IEC standard)
11 Joint box:
■ The box is mounted on the top of the generator.
■ The electric wiring access is located in the right (from the uncoupling end of the generator).
■ Line bank and ground lead end connection are provided.
12 Earthing: Ground leads are provided in the housing and joint box.
13 Automatic voltage regulation:
■ Transistor type electronic automatic voltage regulator
■ Adjuster is mounted inside the joint box.
14 Buildup of voltage: Voltage is set up automatically without external power supply.
15 Accessories:
■ Voltage fine adjuster (mounted on the control panel)
■ Current transformer for measuring current, with 1m long cable
■ Flexible coupling disk pad
|
|
|
|
|
